Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to configure Aironet 1602i standalone WAP

Hi all.  I have 4 Aironet 1130AG standalone WAPs and I need to add on 2 Aironet 1602i standalone WAPs as repeaters to extend the same network.  Is it possible for me to save the configuration of a 1130AG that is configured as a repeater and then upload it to the 1602i WAPs?  Or do I need to manually configure the 1602i WAPs as repeaters?  Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: How to configure Aironet 1602i standalone WAP

Just in case, here is an older guide

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43hot.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
5 REPLIES
Hall of Fame Super Silver

Re: How to configure Aironet 1602i standalone WAP

The commands should be similar. You should be able to at least cut and paste some of it to the 1602's.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: How to configure Aironet 1602i standalone WAP

Just in case, here is an older guide

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43hot.html

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
VIP Purple

Re: How to configure Aironet 1602i standalone WAP

Hi Kelso,

Here is a configuration example of a Autonomous AP as repeater. That should help you as well.

http://mrncciew.com/2013/01/20/autonomous-ap-repeater/

Repeater only works with native vlan & therefore AP management & users should be on the same vlan at repeater AP. Given example is simply using Open Auth, but you can add required secuirity mechanism based on what is configured in our 1131 environment

HTH

Rasika

*** Pls rate all useful responses ****

New Member

How to configure Aironet 1602i standalone WAP

Thanks Scott and rasikanayanajith for the replies.  I was able to find the answer and configure my new APs with the info from the older manual (I was looking in a newer one which did not have all of the same information).  Reading the article on autonomous AP repeater helped me learn some things also.

Cisco Employee

How to configure Aironet 1602i standalone WAP

You may copy the running config and make the desired staion role and security changes according to your new 1602i standalone AP and also you may configure the 1602i manually from scratch through GUI or CLI.

6442
Views
3
Helpful
5
Replies
CreatePlease to create content