Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to deny an AP Access for AP Users ?

Hello Guys,

i configure Portocol filter like on this Page , but still get a connection to my AP when i connect as a user,

please help

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a00800e02cf.html#1028373

Thanks

3 REPLIES
Cisco Employee

Re: How to deny an AP Access for AP Users ?

Hi not sure 100% what you are trying to ask given the information you provided.

If you want to stop un authorized client cards associating via the MAC address then the filtres you need to set up are described here

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350ch8.htm#1029067

If ypu are simply trying to filter out certain types of traffic then the link you showed is the correct one can please describe exactly want you want to acheive

New Member

Re: How to deny an AP Access for AP Users ?

i do some filtering.

My wireless clients were unable to conenct to the network,fine.But under the log the A.P still associating my wireless PC card?

Cisco Employee

Re: How to deny an AP Access for AP Users ?

please make sure that the AP is configured for this exactly as per the docco

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350ch8.htm#1029067

one of the common mistakes is the setting "is mac authentication alone sufficent to fully authenticate" should be set to no unless you are doing BOTH server based MAC and EAP

Also make sure you are using the latest firmware or after you have configured it and applied then reload the AP

209
Views
0
Helpful
3
Replies
CreatePlease to create content