Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to discern Autonomous and Lightweight by "show version"

this is "show version" for Aironet 1240AG.

it was LightweightAP.

But now I guess it's AutonomousAP, because I active Autonomous.

So how to discerm?

Is  "flash:/c1240-k9w7-mx.124-21a.JY/c1240-k9w7-mx.124-21a.JY"  Autonomous?

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.08.25 18:10:15 =~=~=~=~=~=~=~=~=~=~=~=
show version
Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.4(21a)JY, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 28-Apr-10 11:14 by prod_rel_team

ROM: Bootstrap program is C1240 boot loader
BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)

MCBR_AP01 uptime is 1 day, 22 hours, 58 minutes
System returned to ROM by power-on
System image file is "flash:/c1240-k9w7-mx.124-21a.JY/c1240-k9w7-mx.124-21a.JY"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
--More--        
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-LAP1242AG-A-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FTX1202B316
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1D:A1:FD:54:14
Part Number                          : 73-9925-06
PCA Assembly Number                  : 800-26579-05
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12010GQ4
Top Assembly Part Number             : 800-29151-02
Top Assembly Serial Number           : FTX1202B316
--More--         Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1242AG-A-K9

Configuration register is 0xF

1 ACCEPTED SOLUTION

Accepted Solutions

Re: how to discern Autonomous and Lightweight by "show version"

Thankfully this is actually very easy.  If the AP is loaded with an autonomous image it will be a k9w7, if it has a CUWN image it will be a k9w8.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
2 REPLIES

Re: how to discern Autonomous and Lightweight by "show version"

Thankfully this is actually very easy.  If the AP is loaded with an autonomous image it will be a k9w7, if it has a CUWN image it will be a k9w8.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: how to discern Autonomous and Lightweight by "show version"

Thank you so much, Stephen.

Your answer is very nice.

I got it.

And talkin about communication from AP to Router at Cisco1941W.

I've done it as well.

Nobu

857
Views
0
Helpful
2
Replies