Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to impose manual certificates in AP`s for avoiding usage of AP in different/ other network

Hi,

Can we manual impose certificates in AccessPoint’s via WLC for avoiding usage of AP`s again in different or other  Networks

1 REPLY

How to impose manual certificates in AP`s for avoiding usage of

Hello,

As per your query i can suggest you the following  solution-

You can use an LSC if you want your own public key infrastructure (PKI) to provide better security, to have control of your certificate authority (CA), and to define policies, restrictions, and usages on the generated certificates.

The LSC CA certificate is installed on access points and controllers. You need to provision the device certificate on the access point. The access point gets a signed X.509 certificate by sending a certRequest to the controller. The controller acts as a CA proxy and receives the certRequest signed by the CA for the access point.

For more information please refer to the link-

http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/c52lwap.html

Hope this will help you.

178
Views
3
Helpful
1
Replies