Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

how to know which access point is down on WLC

i have WLC 5505 with 100 AP joined and up and when i check the number of up access points in the summarry page it is 100 up and 0 down, but when AP is down and i check the summary it is 99 up and 0 down.

the question how to know which AP is down and why the number of AP's always 0 even if 10 AP's is down

regards

A.abdelmaguid

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

how to know which access point is down on WLC

The only way to find out if you only have a WLC and not WCS/NCS or Prime, is to go to the monitor tab and click on Statistics under AP Join.  This will show you all AP's that have been joined.  You need to clear this out if you remove any AP's, but this will get you the information you need.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
2 REPLIES
Hall of Fame Super Silver

how to know which access point is down on WLC

The only way to find out if you only have a WLC and not WCS/NCS or Prime, is to go to the monitor tab and click on Statistics under AP Join.  This will show you all AP's that have been joined.  You need to clear this out if you remove any AP's, but this will get you the information you need.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

how to know which access point is down on WLC

thx scott for ur answer , i got it

212
Views
0
Helpful
2
Replies