07-01-2010 07:10 AM - edited 07-03-2021 06:56 PM
When a guest wlan user is created (by the LobbyAdmn function) there I get back a pop-up box with her autogenerated password. This is normally a rather complex password. Is there any way to print this with e.g. a label printer so that I can give it to people and wish them good luck rather than writing it down, making errors, joking about my hand writing etc. etc.. I think that looks rather unprofessional.
Solved! Go to Solution.
07-01-2010 09:00 AM
Hi Joerg,
This capability (sadly) is only available when creating Guest accounts
using the WCS,as shown in the attached doc. With WCS you have the
option to Print or email this info;
http://cisco.biz/en/US/docs/wireless/technology/guest_access/technical/reference/4.1/GAccess_41.html
Cheers!
Rob
07-01-2010 09:00 AM
Hi Joerg,
This capability (sadly) is only available when creating Guest accounts
using the WCS,as shown in the attached doc. With WCS you have the
option to Print or email this info;
http://cisco.biz/en/US/docs/wireless/technology/guest_access/technical/reference/4.1/GAccess_41.html
Cheers!
Rob
07-02-2010 01:55 AM
Hi Rob,
thanks for the advice that almost solved my problem. We have a WCS but use it for monitoring only. How does the WiSM learn from the WCS that a new visitor account has been created? Does the LobbyAdmin need to apply a config or so?
Thx,
--Joerg
07-02-2010 06:38 AM
Hi Joerg
Yes, when creating guest accounts via the WCS Lobby Admin there is a section
of the cofig that asks which Controllers you want to apply the guest user
to
http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0manag.html
Cheers!
Rob
07-05-2010 07:49 AM
Thx, this solved my problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide