You can use the Remove APs command in WCS to remove the configuration for the original lightweight access point. Keep in mind that only lightweight access points that are not currently registered with any WLAN controller can be removed from the WCS database via the Remove AP operation.
Following stetps may help you :
Step 1 Click Configure > Access Points to display the All Access Points page. In large networks, it is helpful to narrow the listing by using the "Search for APs By" filter in the left-hand margin.
Step 2 Select the non-registered access point(s) that you want to remove by enabling the appropriate check box(es).
Step 3 From the command drop-down menu in the right-hand upper corner of the screen, choose Remove APs and click GO.
Step 4 Confirm your intention to remove the lightweight access points. After doing so, the selected lightweight access point(s) are removed from WCS.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...