Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to set enterprise WPA2 with the AP 1241 ( PEAP-MS-CHAP v2 )

Hi friends

I've already set up the wpa2 with the WLC and AP 1130, with the IAS Radius server according to this howto:

http://cisco.com/en/US/products/ps6366/products_configuration_example09186a0080921f67.shtml

It's working without any problems

i'd like to do the same, but with the AP1241 ( autonomous ) without WLC.

I've tried to use this howto, but actualy it doesn't work :

http://cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml

The main question is if it's possible, because i don't know if the AP supports PEAP-MS-CHAP

When i use it,  IAS server says that the account is granted , but wireless connection on the client says :

Validaty cerificate eroor, or Potential problem with sup0plicant

Thanks for any hints

pet

3 REPLIES
Cisco Employee

Re: How to set enterprise WPA2 with the AP 1241 ( PEAP-MS-CHAP v

try by unchecking the "validate server certificate" or checking it.. if we are using the WZC.

New Member

Re: How to set enterprise WPA2 with the AP 1241 ( PEAP-MS-CHAP v

I'm sorry ?

I cannot understand your answer properly ?

thanks

Re: How to set enterprise WPA2 with the AP 1241 ( PEAP-MS-CHAP v

On the client, under the wireless profile for this ssid, uncheck "validate server certificate." This option forces the Windows client to check with a third-party certificate provider (EnTrust and others) for YOUR certificate that you've applied to the server. You don't want this to happen, so you unselect "validate server certificate" and you won't get that error any longer.

HTH,

John

*Please rate all useful posts*

HTH, John *** Please rate all useful posts ***
873
Views
0
Helpful
3
Replies