10-17-2010 09:05 AM - edited 07-03-2021 07:17 PM
Hello,
a LAP 1310 worked many years fine. Now, it don´t join to the WLC (7.0) anymore.
If I look by ssh to the LAP directly, I see the lost of country and ISO code:
. . .
Slot 0
adminstate ADMIN_DISABLED(2)
radioType Slot is empty
Slot 1
adminstate ADMIN_ENABLED(1)
radioType RADIO_TYPE_UNKNOWN
countryCode ^@^@^@
countryISOCode ^@^@^@
chanAutoCfg CONFIG_AUTO
channel 0
. . .
How can I set the code again?
Solved! Go to Solution.
10-17-2010 10:23 AM
Hi,
This is hardware-coded. Nothing you can do about that on LAPs.
The 1310 only has a b/g radio, so there is only one slot with a radio. It looks to me like your AP died and can't recognize its own radio...
I'd suggest loading an IOS image on it and see what that gives (if the radio is recognized). If working, you can reconvert it to lwapp and see if that works.
If the radio doesn't come up on IOS, you can safely go for RMA.
Nicolas.
===
Please rate this reply if it is useful to you.
10-17-2010 10:23 AM
Hi,
This is hardware-coded. Nothing you can do about that on LAPs.
The 1310 only has a b/g radio, so there is only one slot with a radio. It looks to me like your AP died and can't recognize its own radio...
I'd suggest loading an IOS image on it and see what that gives (if the radio is recognized). If working, you can reconvert it to lwapp and see if that works.
If the radio doesn't come up on IOS, you can safely go for RMA.
Nicolas.
===
Please rate this reply if it is useful to you.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: