Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to set the Country Code for a LAP?

Hello,

a LAP 1310 worked many years fine. Now, it don´t join to the WLC (7.0) anymore.

If I look by ssh to the LAP directly, I see the lost of country and ISO code:

. . .

Slot 0
        adminstate              ADMIN_DISABLED(2)
        radioType               Slot is empty
Slot 1
        adminstate              ADMIN_ENABLED(1)
        radioType               RADIO_TYPE_UNKNOWN
        countryCode             ^@^@^@
        countryISOCode          ^@^@^@
        chanAutoCfg             CONFIG_AUTO
        channel                 0

. . .

How can I set the code again?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: How to set the Country Code for a LAP?

Hi,

This is hardware-coded. Nothing you can do about that on LAPs.

The 1310 only has a b/g radio, so there is only one slot with a radio. It looks to me like your AP died and can't recognize its own radio...

I'd suggest loading an IOS image on it and see what that gives (if the radio is recognized). If working, you can reconvert it to lwapp and see if that works.

If the radio doesn't come up on IOS, you can safely go for RMA.

Nicolas.

===

Please rate this reply if it is useful to you.

1 REPLY
Cisco Employee

Re: How to set the Country Code for a LAP?

Hi,

This is hardware-coded. Nothing you can do about that on LAPs.

The 1310 only has a b/g radio, so there is only one slot with a radio. It looks to me like your AP died and can't recognize its own radio...

I'd suggest loading an IOS image on it and see what that gives (if the radio is recognized). If working, you can reconvert it to lwapp and see if that works.

If the radio doesn't come up on IOS, you can safely go for RMA.

Nicolas.

===

Please rate this reply if it is useful to you.

525
Views
0
Helpful
1
Replies
CreatePlease login to create content