At my current place of work, we have a standalone guest wirleless network powered by adsl with 2 1600i SAP access points. However, only one is working, and try as we might, we cannot get the second one to run. We have tried running the same config as on the one that works, but it is not transmitting the SSID of the wireless router. They are both set as AP mode.
Does one have to be in root mode and another as a repeater? I have read several guides for configuring the AP, but none of them appear to cover adding a second AP to an existing one.
The one that is not functioning is connected to a switch that powers it, and the switch connects to the wireless router.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...