Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to transfer light AP to weight one?

Hey, I just reached the Cisco AP(AIR-LAP1242AG-C-K9) recent days, and found that the AP are used before via a wireless controller, which means it is a light AP. and now i want to change it to be a weight one. because i want to use it in my office without the controller.

But a issue occured during the operation. i connected my pc to the AP via console, and CRT cannot work when i start connection.i can't control the AP.(the cable is ok because i used it to configure a switch few minutes ago.)I don't know why. so do you know any other ideas about this problem. or realise my intention just like the topic.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: How to transfer light AP to weight one?

3 REPLIES
Hall of Fame Super Silver

Re: How to transfer light AP to weight one?

Make sure flow control is disabled. There is a difference when connecting to a switch or router than a wireless device.

Sent from Cisco Technical Support iPad App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: How to transfer light AP to weight one?

Community Member

How to transfer light AP to weight one?

thank you. i found the reason why i cannot use the console cable to finish the conversion.

265
Views
0
Helpful
3
Replies
CreatePlease to create content