How to use or configure Wireless Controller feature of SUP 8-E
I know SUP-8E has Wireless Controller feature. I am looking for some tips to use it. - Will I need a specific IOS version to use it?? * This is IOS version that I have : cat4500es8-universal.SPA.03.06.00.E.152-2.E.bin
- Do I have to use a command to enable the feature to use it and what it that?
- Is that GUI or CLI to configure it ?
_ what is the default license of AP with SUP-8E? (ex> 50AP or 100AP)
yes, there is hardly any documents available to public on cisco.com ;(, very bad indeed.
I do not have Sup8-E, but based on other converged access product (5760/3850) config experience here are my responses to your query.
- Will I need a specific IOS version to use it?? * This is IOS version that I have : cat4500es8-universal.SPA.03.06.00.E.152-2.E.bin No, you do not require any specific version of IOS to use WLC functionality.
- Do I have to use a command to enable the feature to use it and what it that? You have to enable wireless management vlan (where APs connect on that vlan) & then configure WLC role (Mobility Controller-MC or Mobility Agent - MA) on your Sup8-E.
Here how you configure it in 3850 (in your case commands should be identical as all use IOS-XE platform)
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...