Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

akc
New Member

I delete the IOS of the aironet 1100 series By Mistake and now I need to copy the IOS image file

Hi,

I have a cisco aironet 1100 series wireless access point.

by mistake I delete the IOS of the router and now I need to copy the IOS image file again on it.

I need your help please.

Right now it has the Ethernet led RED, Status Green, Rdio RED. T that minds no Cisco IOS image file).

I have downloaded the file c100-k9w7-mx.123-8.jed

and i have download tftp servers (tftpd32)

I have the router connected directly to a pc with the static ip address 10.0.0.2

but the problem is basically that i don't know ehat ip address the router 1100 have right now, I can't access it by a web browser.

and by a tftpd32 I have try but no function.

I don't know what I doing wrong.

other things is that I haven't found a clearly manual about how to use a tftpd32 to transfer the file to the router cisco 1100 series.

thanks .

I will wait your hepls.

  • Getting Started with Wireless
2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Gold

Re: I delete the IOS of the aironet 1100 series By Mistake and n

Hall of Fame Super Gold

Re: I delete the IOS of the aironet 1100 series By Mistake and n

Hi Anne,

Can you mark this post as "Answered"?

6 REPLIES
Silver

Re: I delete the IOS of the aironet 1100 series By Mistake and n

Anne,


Here's the link:


Reloading the Access Point Image


So do this:


1. Configure your TFTP server (the PC) to 10.0.0.2 (done)

2. Get an aIOS image for your AP (done)

3. Rename your AP IOS image to c1100-k9w7-tar.default


(steps 4 thru 9 as given in the link above.)


The AP will give itself an address of 10.0.0.1 (I think).


Cheers,


Aaron

akc
New Member

Re: I delete the IOS of the aironet 1100 series By Mistake and n

Hi arrond

thanks you for take your time and answred me .

i have done that !

but still I have problem,

The AP is supposed to have itself an address of 10.0.0.1 , but not, because I ping that address and don't response.

I use a solarwinds tfpt server , I started the service but it don't send nothing to the ap100series.

Have you done that anytime?

I really wonder if there is any way to copy the IOS routers model?

because I need some helps

thankyou!!

Hall of Fame Super Gold

Re: I delete the IOS of the aironet 1100 series By Mistake and n

akc
New Member

Re: I delete the IOS of the aironet 1100 series By Mistake and n

thank you!!  leolaohoo

thank you!!

thank you!!

thank you very much!! for yoy help.

That's was amaizing.

Now my cisco aironet 1100 series has the correct IOS.

Hall of Fame Super Gold

Re: I delete the IOS of the aironet 1100 series By Mistake and n

Hi Anne,

Can you mark this post as "Answered"?

Hall of Fame Super Gold

Re: I delete the IOS of the aironet 1100 series By Mistake and n

Thanks for the ratings Anne.

1577
Views
5
Helpful
6
Replies
This widget could not be displayed.