Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

I would like to know differences between bellow mentioned SW for Cat 3850.

In Cisco future navigator CAT3850 UNIVERSAL W/O DTLS doesn’t exist.

  • •1)      CAT3850 UNIVERSAL (cat3k_caa-universalk9.SPA.03.02.02.SE.150-1.EX2.bin)

  • •2)      CAT3850 UNIVERSAL W/O DTLS (cat3k_caa-universalk9ldpe.SPA.03.02.02.SE.150-1.EX2.bin)

Which SW should I used, if I would like to used CAT3850 like Wi-Fi WLC-MC.

Janez

Everyone's tags (2)
5 REPLIES

I would like to know differences between bellow mentioned SW for

depends on where you are at, if you are somewhere that would require the LDPE image then go with that.

Othewise go with

CAT3850 UNIVERSAL (cat3k_caa-universalk9.SPA.03.02.02.SE.150-1.EX2.bin)

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Cisco Employee

Does an LDPE image have SSH

Does an LDPE image have SSH support?

Hall of Fame Super Silver

It does.  We have a few in

It does.  We have a few in Russia and I'm able to ssh to the box.

-Scott 

*** Please rate helpful posts *** 

-Scott
*** Please rate helpful posts ***
Cisco Employee

Thank you very much

Thank you very much

Hall of Fame Super Gold

I would like to know differences between bellow mentioned SW for

If the switch will be installed in Russia, you need LDPE.  If not, go with the non-LDPE.

6179
Views
16
Helpful
5
Replies