Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IAS RADIUS Authentication with WPA

I have an 1131 that I am running stand-alone (autonomous). I am looking for an config example on how to set it up to autenticate to my RADIUS server (running on my domain controller), and use WPA encryption. So far all I can find are configs for AP using WLCs. Can anyone help? Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: IAS RADIUS Authentication with WPA

take a look at the link below. The one you want is, MS PEAP w/IAS, it has a pretty detailed walk through on configuring the IAS and an AP.

http://www.dweezlenation.com/

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
6 REPLIES

Re: IAS RADIUS Authentication with WPA

take a look at the link below. The one you want is, MS PEAP w/IAS, it has a pretty detailed walk through on configuring the IAS and an AP.

http://www.dweezlenation.com/

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Community Member

Re: IAS RADIUS Authentication with WPA

Perfect, worked like a charm. Thanks!

Community Member

IAS RADIUS Authentication with WPA

Hello adcorbett,

I'm having the same issue. The link that Stephen provided is broken. Do you remember how you configured the IAS and the AP?

Thanks in advance

Nando

Hall of Fame Super Silver

Re: IAS RADIUS Authentication with WPA

Fernando,

Here is another link you can reference.

http://pcloadletter.co.uk/2011/07/11/cisco-wifi-active-directory-auth/

You can find other out there, just search for Cisco autonomous peap Microsoft ias

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Re: IAS RADIUS Authentication with WPA

Thanks Scott,

I'm going to review the document and I'll let you know.

Best

Hall of Fame Super Silver

Re: IAS RADIUS Authentication with WPA

Fernando,

Take a look at the doc because another bug part of this the the radius configuration and the certificate which is required on the radius server.

What I have done in the past is look at one example and search for others so you can get a good comparison if what you need to do. You can find links to doc and videos if you want to see how IAS should be setup.

Here is another example but with NPS which is similar

http://networklessons.com/wireless/peap-and-eap-tls-on-server-2008-and-cisco-wlc/

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
374
Views
0
Helpful
6
Replies
CreatePlease to create content