Integration of WLSE with Cisco Works 2000 or HP OpenView
Can anybody give me some insight into integration of WLSE with Cisco Works 2000 or HP OpenView. The problem is that in a organisation if i have 10 WLSE installed, as WLSE has a limitation of 500 APs, now how can i have a centralized management of WLSEs. I think it can be achieved if we can integrate it with Cisco Works 2000 or HP OpenView. I am not able to find any reference to it on cisco site.
Re: Integration of WLSE with Cisco Works 2000 or HP OpenView
Currenty there is no Integration of WLSE with CW2K available. Though you can import devices into WLSE using the RME csv file. Yes, this sounds not good if you have more than 500 APs that you're trying to manage. In that case you'd need to deploy more than one WLSE in your network. But I'm sure that in the future versions of WLSE this fetaure may get added or WLSE may be able to support more than 500 APs. I'd suggest that for this, you should submit an enhancement request via yout local Cisco Account Team/SE.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...