Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

interface Virtual Dot11Radio0, changed state to down

Interface Virtual Dot11Radio0,changed state to down then up every few minutes. This happens several times sometimes on more than one AP cisco AIR-AP1231G-A-K9 with 12.2 (8) JA. Rebooting seems to fix it temporarily.

1 REPLY
Silver

Re: interface Virtual Dot11Radio0, changed state to down

The Virtual-Dot11Radio interface is used to indicate whether or not there are any clients associated to a given access point or radio within that access point, When clients are associated, the Virtual-Dot11Radio interface is up; when there are no clients associated, it shows down.

1098
Views
0
Helpful
1
Replies
CreatePlease to create content