Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. And see here for current known issues.
i wanna to configer internal dhcp in WISM
how can i
i need the pool start from 10.30.101.50 t0 200 /24 (255.255.255.0)
the network 10.30.101.0
the defoult router must be the WISM-A ip address
also i configured the DNS
and put in the ap-manager interface the primary DHCP server the ip 10.30.101.2
and i changet to 10.30.101.1
and its not work whats the mistake and what i shoul do ?i tried to use external dhcp server for ap 1020 and configure dns , optoin 43 but the ap didnt took any ip address
wism-a management 10.30.101.2
ap manager 10.30.101.3
vlan id 101
the client vlan is 202 ip 10.30.202.3
and all port access to this vlan in the edge switch
ip dhcp excluded-address 10.30.101.50 10.30.101.200, network 10.30.101.0, default-router 10.30.101.2
You're going to want to put the Management IP address of the controller as the DHCP server.