Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Internal DHCP not working for wireless Clients

Hello,

I'm in the process of installing a WLC but am having trouble with the internal DHCP server, I am able to associate but am not assigned an IP address, this is the configuration :

Client interface :

Interface Name................................... XXXXXXXX

MAC Address...................................... 00:1d:45:5e:52:27

IP Address....................................... 192.168.34.1

IP Netmask....................................... 255.255.255.0

IP Gateway....................................... 192.168.34.254

VLAN............................................. 331

Quarantine-vlan.................................. no

Active Physical Port............................. LAG (29)

Primary Physical Port............................ LAG (29)

Backup Physical Port............................. Unconfigured

Primary DHCP Server.............................. 10.100.8.1

Secondary DHCP Server............................ Unconfigured

DHCP Option 82................................... Disabled

ACL.............................................. Unconfigured

AP Manager....................................... No

Guest Interface.................................. No

DHCP pool :

Dhcp Scope Info

Scope: XXXXXX

Enabled.......................................... Yes

Lease Time....................................... 14400 (4 hours )

Pool Start....................................... 192.168.34.2

Pool End......................................... 192.168.34.200

Network.......................................... 192.168.34.0

Netmask.......................................... 255.255.255.0

Default Routers.................................. 192.168.34.254 0.0.0.0 0.0.0.0

DNS Domain.......................................

DNS.............................................. 212.30.200.200 212.30.200.199 0.0.0.0

Netbios Name Servers............................. 0.0.0.0 0.0.0.0 0.0.0.0

The Vlan interface points at the IP address of the Management interface.

Version :

Product Version.................................. 4.2.61.0

RTOS Version..................................... 4.2.61.0

Bootloader Version............................... 4.2.61.0

Anyone see what I'm missing ?

2 REPLIES
Community Member

Re: Internal DHCP not working for wireless Clients

If anyone else is having this problem, downgrade your WLC to 4.1.185.0, works like a charm after that.

Community Member

Re: Internal DHCP not working for wireless Clients

same problem here,

thanks

371
Views
0
Helpful
2
Replies
CreatePlease to create content