03-14-2008 01:28 PM - edited 07-03-2021 03:32 PM
*Mar 14 18:39:05.555: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available
*Mar 14 18:39:05.555: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available
*Mar 14 18:39:05.555: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available
Any idea what this means?
Thank you
03-14-2008 07:46 PM
Can you provide more info;
LWAPP or IOS
Type of AP
What channel and power setting you have the ap set to.
03-14-2008 08:31 PM
03-15-2008 04:29 AM
Hi,
what is the power source of the AP?
Power Supply, PoE (what kind of, poe switch, poe incetor, forign poe device (not Cisco)).
If it is a ios ap and prestd. PoE device (also ASA5505) try
power inline negotiation prestandard source
on the AP.
If it is connected by lwapp to a wlc try:
(Cisco Controller) >config ap power injector ...
Martin
03-15-2008 09:46 AM
Its a 1811W router running 12.4(15)T4 enterpr. ios i believe.
Thank you
03-15-2008 09:51 AM
So it has an integrated radio. shouldnt be a power source problem. i am out, didnt know that device.
M.
03-15-2008 04:56 PM
Thx anyways M
03-18-2008 10:54 AM
It seems its broken getting a new one fyi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide