Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

invalid power levels?

*Mar 14 18:39:05.555: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available

*Mar 14 18:39:05.555: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available

*Mar 14 18:39:05.555: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available

Any idea what this means?

Thank you

7 REPLIES
Hall of Fame Super Silver

Re: invalid power levels?

Can you provide more info;

LWAPP or IOS

Type of AP

What channel and power setting you have the ap set to.

-Scott
*** Please rate helpful posts ***
Community Member

Re: invalid power levels?

I went in the SDM wireless interface created a new Vlan100 with a SSID MGuest and gave it an ip of 192.168.2.1.

Then I created a DHCP pool for that specific vlan, thats all.

Thank you!

Community Member

Re: invalid power levels?

Hi,

what is the power source of the AP?

Power Supply, PoE (what kind of, poe switch, poe incetor, forign poe device (not Cisco)).

If it is a ios ap and prestd. PoE device (also ASA5505) try

power inline negotiation prestandard source

on the AP.

If it is connected by lwapp to a wlc try:

(Cisco Controller) >config ap power injector ...

Martin

Community Member

Re: invalid power levels?

Its a 1811W router running 12.4(15)T4 enterpr. ios i believe.

Thank you

Community Member

Re: invalid power levels?

So it has an integrated radio. shouldnt be a power source problem. i am out, didnt know that device.

M.

Community Member

Re: invalid power levels?

Thx anyways M

Community Member

Re: invalid power levels?

It seems its broken getting a new one fyi

399
Views
0
Helpful
7
Replies
CreatePlease to create content