Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ios update and mesh ap

                   I've two wlan controller Cisco2100 (Air-WLC2125-k9) with a software version 7.0.98.0. Now I want upgrade to a new release but some my Ap are in mesh mode. How this ap will upgrade ?

Many Thanks

2 REPLIES
VIP Purple

Re: ios update and mesh ap

HI Simone,

Normal APs upgrade like this:

Upgrade the WLC only. The WLC will distribute the new AP firmware's at a time the AP re registers back on the controller.

Regards

Hall of Fame Super Silver

Re: ios update and mesh ap

I would use the pre-image download as long as your mesh AP's are supported. This way you don't have a chance of any MAPs getting isolated.

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mfw.html#wp1132291

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
226
Views
4
Helpful
2
Replies
CreatePlease to create content