When you deploy wireless, on of the biggest problems is no control over wireless profiles. There is nothing you can do on the AP. If the user has added all three SSIDs, well that means the device has a choice of what SSID it wants to connect to. The only way to prevent the issue you are having is to only have the iPad users connect to one SSID. It might be training of users to let them k ow what they can and shouldn't do. Maybe not broadcasting the SSID is what you need to do so these devices don't automatically join networks.
how big is your deployment? You could do a aaa Mac address authentication. If its a small deployment, less macs to deal with the better.
Sent from Cisco Technical Support iPad App
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...