Is there an easy way to "bulk create" AP Templates
I'm adding a campus to an existing WCS. Campus has six buildings, each building has up to 9 floors. Most floors of the buildings are identical, but every now and then we change the SSIDs deployed on a "per floor basis".
I'm wondering if there is a way to create an AP template and then copy it six or eight times, changing only the name of each template - such as, Building-X-floor-1, and then floor 2, 3, and so on.
Of course I would have to go in and change the APs, and possibly AP groups, but at least the bulk creation would be complete.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...