12-07-2013 09:56 AM - edited 07-04-2021 01:23 AM
Hi all,
We are running SRE module on router with code of 6.x release .Is there any compatibilty matrix available for ISE and WLC code to support CWA . because as of now , the wireless clients are not redirecting to the ISE login page.
Kindly suggest.
Thanks,
Regards,
Vijay
Solved! Go to Solution.
12-07-2013 10:07 AM
The doc is for wireless guest using CWA. For wired guest, I don't know since you can do wired guest from a WLC that supports it or from a switch.
Sent from Cisco Technical Support iPhone App
12-07-2013 09:59 AM
I believe WLC v7.2 and later is supported by ISE when using CWA.
Sent from Cisco Technical Support iPhone App
12-07-2013 10:00 AM
This might help
https://supportforums.cisco.com/docs/DOC-26442?referring_site=facebook&channel=CiscoSupportCommunity
Sent from Cisco Technical Support iPhone App
12-07-2013 10:03 AM
Hi Mr.Scott ,
Thnks a lot for your quick response . Is this will be applicable for both wired guest users CWA and wireless guest users CWA..
Regards,
Vijay.
12-07-2013 10:07 AM
The doc is for wireless guest using CWA. For wired guest, I don't know since you can do wired guest from a WLC that supports it or from a switch.
Sent from Cisco Technical Support iPhone App
12-07-2013 10:07 AM
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080ba6514.shtml
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide