12-07-2013 09:56 AM - edited 07-04-2021 01:23 AM
Hi all,
We are running SRE module on router with code of 6.x release .Is there any compatibilty matrix available for ISE and WLC code to support CWA . because as of now , the wireless clients are not redirecting to the ISE login page.
Kindly suggest.
Thanks,
Regards,
Vijay
Solved! Go to Solution.
12-07-2013 10:07 AM
The doc is for wireless guest using CWA. For wired guest, I don't know since you can do wired guest from a WLC that supports it or from a switch.
Sent from Cisco Technical Support iPhone App
12-07-2013 09:59 AM
I believe WLC v7.2 and later is supported by ISE when using CWA.
Sent from Cisco Technical Support iPhone App
12-07-2013 10:00 AM
This might help
https://supportforums.cisco.com/docs/DOC-26442?referring_site=facebook&channel=CiscoSupportCommunity
Sent from Cisco Technical Support iPhone App
12-07-2013 10:03 AM
Hi Mr.Scott ,
Thnks a lot for your quick response . Is this will be applicable for both wired guest users CWA and wireless guest users CWA..
Regards,
Vijay.
12-07-2013 10:07 AM
The doc is for wireless guest using CWA. For wired guest, I don't know since you can do wired guest from a WLC that supports it or from a switch.
Sent from Cisco Technical Support iPhone App
12-07-2013 10:07 AM
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080ba6514.shtml
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: