Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

joining access points to 8510 controllers in SSO

If I have a mix of Cisco 3500 and 3600 series access points that I want to join a Cisco 8510 contollers running in SSO(HA) mode can I just create one scope on my Windows DHCP server to include both option 43 and 62 for the access points allowing both flavors of AP's to share the same subnet.  Is option 62(vendor VCI) even necessry?

4 REPLIES
Hall of Fame Super Silver

Re: joining access points to 8510 controllers in SSO

I think you mean option 60? That is optional. It might be easier to use DNS and create a record for Cisco-capwap-controller and point that to each of your wlc's management up address. Option 43 works also.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

joining access points to 8510 controllers in SSO

So is option 43 and option 60 even necessary?  I will be running both Cisco 3500 and 3600 series accces points. We want to avoid having to create  separate dhcp scopes for each model of AP. We are going to be migrating 800+ access points from WCS 7.2 over to Prime NCS 7.4.  We are wanting to do the migration one site at at time.

Hall of Fame Super Silver

Re: joining access points to 8510 controllers in SSO

Upgrade from wlc's to prime has no affect on what APs will join what WLC. I only use option 43 and or DNS when I have new APs out of the box. Once the ap is joined, I typically disable option 43 or remove the DNS entry. Remember that the joining of an ap to a WLC is different from what APs should be assigned or joined to what WLC. Assigning or telling an ap what WLC it should join is by setting the primary and secondary WLC in the APs high availability tab.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: joining access points to 8510 controllers in SSO

Here is a link to what you need to do when your APs have joined the WLC.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
284
Views
0
Helpful
4
Replies