Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

LAP 1131 Rebooting Every 5 Hrs

Hi All,

We have 5508 WLC with 7.4.100.60 Ios. and we have multiple Ap's in our network (3600,1131,1242) and integrated with 5508.

We found on eissue recently i.e. all 1131 access points are rebooting every 5 to 6 hrs.

Let me know waht is the issue and solution.

Regards,

Satish.

3 REPLIES
Hall of Fame Super Silver

Re: LAP 1131 Rebooting Every 5 Hrs

I would open a TAC case. If this happened after you upgraded and ALL 1131's reboot, then its an issue with v7.4.100.60 and the 1131's. You might need to downgrade to fix your issue.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
VIP Purple

Re: LAP 1131 Rebooting Every 5 Hrs

For 1142 & 1040 series there was a bug (CSCud97983) in 7.4.100.0 code, but it was fixed in 7.4.100.60. If you having specific issue to 1131 after WLC code upgrade, it could be a bug. 

As Scott suggested open a TAC case & Cisco may give you an engineering release which could fix your issue (if you do not want to downgrade). We were using 7.4.100.60 & had few critical bugs.. so now we are running on 7.4.100.107 given by TAC.

You can find certain bugs impacted us with this 7.4.x code from here.

http://mrncciew.com/2013/02/10/day-0-with-wlc-7-4-code/

HTH

Rasika

Re: LAP 1131 Rebooting Every 5 Hrs

Hello Satish,

As per your query i can suggest you the following solution-

Power Fluctuations

This section addresses possible AC and Power over Ethernet (PoE) power problems or anomalies with a mesh access point.

For more information please refer to the link-

http://www.cisco.com/en/US/docs/wireless/access_point/1500/troubleshooting/guide/TrbleshtMesh.html

Hope this will help you.

214
Views
0
Helpful
3
Replies
CreatePlease to create content