i am using WLC 2106 with 5.1 version and trying to connect LAP 1232 to wlc.when i connect the lap to POE switch and wlc in same switch,lap is able to connect to WLC but when i am connecting the LAP directly to WLC (port 7/8) AP is not joining the wlc.
when i give the command debug lwapp events enable/debug lwapp packets enable and restart the LAP (after plugging off the lap cable and connecting back) not getting any output on WLC.
is it teh case that WLC not able to provide sufficient power to AP.i dont have external power supply to connect lap to any other port on WLC.
Also even after making the LAP default after using MODE button, still it asks for the username..what woule be the username here.tried cisco/cisco but not working..
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...