Laptop not able to get the wireless signal from the lightweightAP
Brief idea of the installation.
One WLC 5500 active -> second not yet installed 36 AP active, at the end they will be 45 (9 not installed) Everything on the configuration look active and the light AP are registred to th e WLC. RF Channel definition done by WLC on all AP Power definition done by WLC on all AP Detection of rouge AP
But the laptops can't even detect the RF signal.
I try to detect the signal with 2 laptop which they where working in other sites with wireless in place. We ara using 3 different application or client: Ippass, Odyssey, wiresquark Any of this application detect the signal.
However, on the WLC and on the light AP are up and running. Status up, channel and power automatic definition. On the log I can see the detection of some Rouge AP around.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...