There are a few main steps to do to configure the local EAP with LEAP (supposing that WLAN is already created):
- create local eap profile and choose it to support LEAP.
- choose local eap auth priority to point to your preferred location for credentials. The two options you have are local (if credentials stored locally in "local net users" (WLC GUI-> Security -> AAA -> Local Net Users), or LDAP if you have LDAP external DB configured).
- configure the WLAN to use local EAP for authentication. (WLAN GUI -> WLANs -> Your WLAN -> Security tab -> AAA Servers).
If you are using LDAP you need to configure this independently. You can find LDAP/Local EAP configuration example in this link:
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...