LED Lights on AP

[wellsjo]

What does it mean when the radio light is a constant green?

[Rob Huffman]

Hi Joy,

Hopefully these are the guides you are looking for, if I missed the one you need let me know.

Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide

Checking the Access Point LEDs

http://www.cisco.com/en/US/products/ps6306/products_installation_guide_chapter09186a008069a25d.html#wp1030793

Cisco Aironet 1100 Series Access Point Hardware Installation Guide,

Checking the Lightweight Access Point LEDs

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_installation_guide_chapter09186a00806a623a.html#wp1030793

Checking the Autonomous Access Point LEDs

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_installation_guide_chapter09186a00806a61ea.html#wp1030793

Cisco Aironet 1240AG Series Access Point Hardware Installation Guide

Troubleshooting 1240AG Series Autonomous Access Points / Checking the Top Panel LEDs

http://www.cisco.com/en/US/products/ps6521/products_installation_guide_chapter09186a00806a7973.html#wp1015872

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

Troubleshooting Autonomous Access Points / Checking the Top Panel LEDs

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_installation_guide_chapter09186a00806a69f1.html#wp1030793

Hope this helps!

Rob

Please remember to rate helpful posts.....

[johnruffing]

As noted in other threads on the forum, if you are using the lightweight version of the AP, there is an error condition where the AP LED on the LAP-1131AG access point LED will display the light green color (typically indicating normal operation) when it is unable to obtain an IP address via DHCP.

This is a known bug that Cisco is in the process of remediating.

- John

[wellsjo]

Thanks for the response. I was getting frustrated and should have been more specific, sorry. The AP is an Aironet 1200 series and it has a static IP. It has been in a territory "war" with another Cisco AP of which I have no control over. The other party set the other IP to broadcast over "a" only and that seemed to help a lot. Now I am trying to fine tune signal drops and disconnections. I noticed that at times the bottom (radio) light stays solid green and couldn't find out what that meant in the LED TS chart.

J. Wells