Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

LED on AP

Hi

LED on the Wireless AP displays different colors ( RED / Blue / Orange / Green )  ; can someone care to reply what each color indicates.

thanks

ST

2 REPLIES
Hall of Fame Super Silver

Re: LED on AP

You will see the AP go through the various colors when the AP is powered up.  Solid Green means it is up but no associations.  Blue means there is at least one device associated to that AP.  Red is bad if that says on and Orange, I don't know.

As the access point attempts to connect to the controller, the LEDs cycle through a green, red, and amber sequence, which can take up to 5 minutes

http://www.cisco.com/en/US/docs/wireless/access_point/1140/quick/guide/ap1140gsg.html#wp37791

-Scott
*** Please rate helpful posts ***

Re: LED on AP

Orange is typical of a power issue // typically POE.

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
357
Views
0
Helpful
2
Replies
CreatePlease to create content