02-05-2012 09:55 AM - edited 07-03-2021 09:31 PM
Hi ,
I have guest wireless connection in my lan where as i have connected WLC in DMZ to firewall and it goes directly to internet ,....
now i am getting complaint about excessive internet usage in my premises ....
i want to limit the internet usage especially on guest wireless users .... do we have any option on WLC to limit the same or i need to limit the bandwidth on firewall interface only .....
can anybody suggest for the same?
Solved! Go to Solution.
02-05-2012 11:10 PM
I don't know the Juniper FW, so you might want to post on their forum. I just thought since you mentioned that you could either do it on the wlc or the FW that it was possible and you knew how. I just don't know if the Juniper FW can or can't limit the overall traffic.
02-05-2012 10:05 AM
You might be better off limiting the bandwidth on the FW. On the wlc you can limit per user, but not total bandwidth.
Sent from Cisco Technical Support iPhone App
02-05-2012 10:52 PM
Hi Scott,
Thanks for your reply. .....
could you please suggest me how to limit on firewall ? ....we have Juniper firewall in our set-up.
02-05-2012 11:10 PM
I don't know the Juniper FW, so you might want to post on their forum. I just thought since you mentioned that you could either do it on the wlc or the FW that it was possible and you knew how. I just don't know if the Juniper FW can or can't limit the overall traffic.
02-05-2012 11:42 PM
Hi Scott,
Many thanks for your clarification ......... i will work on firewall side ... no issues.....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide