Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

limiting internet bandwidth/usage on Guest wireless access

Hi  ,

I have guest wireless connection in my lan where as i have connected  WLC in DMZ to firewall and it goes directly to internet ,....

now i am getting complaint about excessive internet usage in my premises ....

i want to limit the internet usage especially on guest wireless users .... do we have any option on WLC to limit the same or i need to limit the bandwidth on firewall interface only .....

can anybody suggest for the same?

  • Getting Started with Wireless
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: limiting internet bandwidth/usage on Guest wireless access

I don't know the Juniper FW, so you might want to post on their forum. I just thought since you mentioned that you could either do it on the wlc or the FW that it was possible and you knew how. I just don't know if the Juniper FW can or can't limit the overall traffic.

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
4 REPLIES
Hall of Fame Super Silver

Re: limiting internet bandwidth/usage on Guest wireless access

You might be better off limiting the bandwidth on the FW. On the wlc you can limit per user, but not total bandwidth.

Sent from Cisco Technical Support iPhone App

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
New Member

Re: limiting internet bandwidth/usage on Guest wireless access

Hi Scott,

Thanks for your reply. .....

could you please suggest me how to limit on firewall ? ....we have Juniper firewall in our set-up.

Hall of Fame Super Silver

Re: limiting internet bandwidth/usage on Guest wireless access

I don't know the Juniper FW, so you might want to post on their forum. I just thought since you mentioned that you could either do it on the wlc or the FW that it was possible and you knew how. I just don't know if the Juniper FW can or can't limit the overall traffic.

Thanks, Scott *****Help out other by using the rating system and marking answered questions as "Answered"*****
New Member

Re: limiting internet bandwidth/usage on Guest wireless access

Hi Scott,

Many thanks for your clarification ......... i will work on firewall side ... no issues.....

3830
Views
0
Helpful
4
Replies