Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Lineing up antenas for Bridging

Hello I have a question

What else is there to help with the aligning of antenas besides line of site in an bridging enviorment. Would the site survey tool included with the acu be you rbest bet or do the bridges themselve have built in built in site survey tools

Thanks

David

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Lineing up antenas for Bridging

Bridges dosen't have built in site survey tool..But you can use those link test and antenna alignment utilities which you can access it via http gui for that.

2 REPLIES
Cisco Employee

Re: Lineing up antenas for Bridging

Bridges dosen't have built in site survey tool..But you can use those link test and antenna alignment utilities which you can access it via http gui for that.

Cisco Employee

Re: Lineing up antenas for Bridging

Hi ,

For the bridge troubleshooting , Cisco bridge has light duty tools like Link test and Antenna Alignment test .

One more workaroud is put the root bridge in AP mode and at the non root

bridge end have the wireless client with those external LMC antenna and you

can use site survey tool built in ACU .

There are other 3rd party tools like airmagnet can help

199
Views
0
Helpful
2
Replies