Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Load Profile Failed for Base Radio MAC

Hi Folks,

What does this actually mean? I have clients dropping off the network constantly, they're in a warehouse environment and travel relatively fast so they roam alot. Coverage is good, co-channel is fine (there isn't any) noise floor is excellent, warehouse is stand alone, no neighbouring wireless to cause any interference. It's a legacy infrastructure I've inherited running on 4404's I've upgraded it to 7.0.240.0 access points are AIR-LAP1142AG's but only the g is used, 802.11a is turned off on the controller and the AP's have no antenna for these radios anyway.

I get tons of these errors along with coverage hole errors but I understand what they are just this load profile one I can't get any details on

BR

Rockford

Output has been sanitised!

1 Wed Sep 4 14:29:48 2013 Load Profile Failed for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 
2 Wed Sep 4 14:29:27 2013 Load Profile Updated to Pass for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 
3 Wed Sep 4 14:28:48 2013 Load Profile Updated to Pass for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 
4 Wed Sep 4 14:28:27 2013 Load Profile Failed for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 
5 Wed Sep 4 14:26:48 2013 Load Profile Failed for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 
6 Wed Sep 4 14:26:27 2013 Load Profile Updated to Pass for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 
7 Wed Sep 4 14:22:48 2013 Load Profile Updated to Pass for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 
8 Wed Sep 4 14:20:27 2013 Load Profile Failed for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 
9 Wed Sep 4 14:19:16 2013 Coverage hole pre alarm for client[1] xx:xx:xx:xx:xx:xx on 802.11b/g interface of AP  (ap hostname). Hist: 0 0 0 0 0 0 0 0 0 5 5 3 1 22 28 16 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0
10 Wed Sep 4 14:19:16 2013 Coverage hole pre alarm for client[1] xx:xx:xx:xx:xx:xx on 802.11b/g interface of AP xx:xx:xx:xx:xx:xx (ap hostname). Hist: 0 0 0 0 0 0 0 0 1 1 5 5 20 30 8 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
11 Wed Sep 4 14:19:16 2013 Coverage hole pre alarm for client[1] xx:xx:xx:xx:xx:xx on 802.11b/g interface of AP xx:xx:xx:xx:xx:xx (ap hostname). Hist: 0 1 1 4 4 4 9 8 12 11 11 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
12 Wed Sep 4 14:19:16 2013 Coverage hole pre alarm for client[1] xx:xx:xx:xx:xx:xx on 802.11b/g interface of AP xx:xx:xx:xx:xx:xx (ap hostname). Hist: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 14 18 30 11 0 0 0 0 0 0 0 0 0 0 0 0 0
13 Wed Sep 4 14:18:48 2013 Load Profile Failed for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 
14 Wed Sep 4 14:16:28 2013 Load Profile Updated to Pass for Base Radio MAC: xx:xx:xx:xx:xx:xx and slotNo: 0 

       

  • Getting Started with Wireless
Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Load Profile Failed for Base Radio MAC

IIRC. Load profile has to so with the number of clients per radio. Though this is just a warning message, it doesn't kick clients off when they are over the limit.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
5 REPLIES

Re: Load Profile Failed for Base Radio MAC

IIRC. Load profile has to so with the number of clients per radio. Though this is just a warning message, it doesn't kick clients off when they are over the limit.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: Load Profile Failed for Base Radio MAC

Thanks Steve

New Member

please, tell me more. I Load

please, tell me more. I Load Profile Failed too.

Re: Load Profile Failed for Base Radio MAC

Rockford,

If this happens frequently enough, capture a client debug and post the results ..

Sent from Cisco Technical Support iPad App

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

please, tell me more. I Load

please, tell me more. I Load Profile Failed too.

4674
Views
10
Helpful
5
Replies
This widget could not be displayed.