Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Loading new firmware question

I have a Aironet Lap1141n that has the default firmware on it. I am changing the firmware to c1140-k9w7-tar.152-4.JB5.tar so it can be used as a standalone unit.

 

My question is since this is a .tar file how or what is the best way to do this? I am using xmodem to do it btw. If I put that file on the AP is there a way to extract it? Or should i extract it before loading it to the AP using 7zip and just sending the c1140-k9w7-mx.152-4.JB5 file?

 

Thank you

2 REPLIES
VIP Purple

If your AP has a mode button

If your AP has a mode button/reset button, you can use the following method. You have to rename your image "c1140-k9w7-tar.default" to use in this method.

http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/

 

HTH

Rasika

**** Pls rate all useful responses ****

Bronze

Please refer to the following

Please refer to the following link:

https://supportforums.cisco.com/discussion/10841111/lightweight-autonomous

39
Views
0
Helpful
2
Replies
CreatePlease login to create content