Lobby ambsssador user authenticatio using a RADIUS server
I have Wism installed in unified wireless network, MS IAS server is sittign in between enterprise AD and Wism. Wireless clients are getting authentincated via ISA againt enterprise AD without any issue.
Now I want to authenticate the admin users in WLC ( for example Lobby admin users) also with AD using the same method.
I tried adding a RADIUS server in WLC on "administraiton>AAA servers" . But the external authentication doesn't seems to be happaning. Does someone has any exmaple on this type of configuraiton ?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...