Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

local Webauth WLC using radius database

Hi all,

I was implement local Webauth WLC not using local auth . I use radius database.

at least I try to add on my  WLAN:

  • layer 3 web auth  authentication
  • layer 2 security is WPA/WPA2 PSK
  • adding aaa radius server
  • aaa radius "network user" check list  enabled
  • web auth priority order
    • radius
    • LDAP

after I Test WLAN ,I cant login using radius database.

but, if I implement security method wpa/wpa2 dot1x  I can login using radius database.

is there any miss in my config for implement webauth  method?

Thanks

ridho

4 REPLIES
VIP Purple

local Webauth WLC using radius database

In Webauth scenario, disable the Layer2 secuirty & try that.

HTH

Rasika

**** Pls rate all useful responses ****

New Member

local Webauth WLC using radius database

hi Rasika,

Thanks for  your reply .

I'll try your suggest to use webauth only.

But,my method using WPA/ WPA2-PSK + Webpolicy authentication still valid and compatible isn't it ?

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080987b7c.shtml

Thanks,

Ridho

Hall of Fame Super Silver

Re: local Webauth WLC using radius database

Are you trying to use LDAP or Radius to authenticate the webauth users? Since you have 802.1x working, I don't see why you would use LDAP. What radius server are you using also? Typically if your using Microsoft IAS or NPS, you have to
Change the device type to Login to get webauth with radius to work. Here is an example of 3 ways to authenticate webauth users. You should be able to find others out there also.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Cisco Employee

local Webauth WLC using radius database

#Only conditional web-auth uses dot1x, otherwise it uses pap/chap/md5 for radius not dot1x.

274
Views
0
Helpful
4
Replies
CreatePlease login to create content