Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Looking for help configuring the wifi on an 881W router

I've been charged with configuring a handful of 881W routers for some of our employees. The concept is this router will replace the employee's current cheapo wifi NAT router. We will configure it with "Easy VPN", a public network, a protected network (that connects to the office), and a basic WIFI setup with WPA2 security.

I'm pretty experienced with Cisco routers and ASA's but I've never touched any of their wifi products so it seems a bit confusing. I'd like to get into the WLAN gui but it doesn't seem to be working. I logged into the router and then into the WLAN OS and I enabled the secure server. When I put in the IP address of the router it pulls up the router GUI and has a link to the WLAN GUI. When I click on the link it stalls out on me. No error messages or anything. I figured I'd come here before opening a TAC case. Any help is appreciated.

Everyone's tags (1)
1 REPLY
Cisco Employee

Re: Looking for help configuring the wifi on an 881W router

yes there is a bug on the Wireless GUI access if you are running 12.4(21a)JA1 software on the AP module.. the below link will help you out in resolving the issue..

https://supportforums.cisco.com/docs/DOC-13047

And to configure the AP for Wireless here is the doc..

http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/wireless_overview.html

lemme know how this works out for you!!

Regards

Surendra

582
Views
0
Helpful
1
Replies