Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LWAP Radio Data Rates

Is it possible to modify the supported data rates on a per AP or per WLAN basis?

If it matters we have 5508 controllers running 7.4.110.0 and 3500 & 3600 series APs.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

LWAP Radio Data Rates

Go to Wireless > RF Profiles and create the Data Rates you want to enable.

Go to the AP Groups and under RF Profiles tab, choose the RF Group you've created for every radio.

2 REPLIES
Hall of Fame Super Gold

LWAP Radio Data Rates

Is it possible to modify the supported data rates on a per AP or per WLAN basis?

You now can with the advent of RF Groups.

Hall of Fame Super Gold

LWAP Radio Data Rates

Go to Wireless > RF Profiles and create the Data Rates you want to enable.

Go to the AP Groups and under RF Profiles tab, choose the RF Group you've created for every radio.

150
Views
4
Helpful
2
Replies
CreatePlease login to create content