Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

LWAPP - change channel

Hi,

we are using WLC and WCS. currently LWAPP is in channel 1, we've to change it to channel 6. how do I change it?

Thanks.

4 REPLIES
Hall of Fame Super Silver

Re: LWAPP - change channel

On the wlc wireless tab, you can select the blue drop down button all the way on the right of the screen for that ap. there you can manually set the channel if you want.

Thanks,

Scott Fella

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

LWAPP - change channel

Hi,

I followed steps but I couldn't find an option to change the channel..please help

Hall of Fame Super Gold

LWAPP - change channel

On the WLC, do the following:

1.  Go to the Wireless tab on top;

2.  TO the left, under Access Points > Radios > 802.11b/g/n > look for the WAP you have on the list;

3.   On the right-hand (you may need to scroll your browser to the right), you'll see a blue "tile" with a triangle pointing downwards;

4.  Hover your curser on top of this tile and choose "Configure";

5.  Go to RF Channel Assignment > under Assignment Method choose Custom and above that choose the channel you want to use.

LWAPP - change channel

in this link you'll find how to do it in both GUI and CLI:

http://tiny.cc/jc004

Rating useful replies is more useful than saying "Thank you"
807
Views
0
Helpful
4
Replies
CreatePlease to create content