Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
I have a few LWAPP model number: cap2602i-a-k9. I am tasked with registering these access points across a site to site VPN where the WLC is located.
I am not sure how these access points should be configured, whether it should be done statically and using autonomous mode, or if possible with the H-REAP feature.
The WLC is a 5508.
Any input would be helpful.
Go to Solution.
Yes it can be configured as HREAP mode. You must create a DHCP pool for APs to get ip on remote location.
There must be a way configured for APs to search for WLC.
Dont forget to rate helpful posts