Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MAC inport on a AIR-CT2504-K9

I have 8 2504 controllers and each needs to have a minimum of 20 MAC addresses added. I would rather not add them one at a time but I don't see any features that allow for an import. Does any one know of a way to do the import?

Everyone's tags (1)
2 REPLIES
Hall of Fame Super Silver

MAC inport on a AIR-CT2504-K9

There is no import... you can use the CLI and paste in the commands which is easier.

config macfilter add

-Scott
*** Please rate helpful posts ***
Bronze

Re: MAC inport on a AIR-CT2504-K9

If you have a WCS you could try to create a template with the mac address of all the wireless clients and apply it to all the WLC.

Sent from Cisco Technical Support iPhone App

381
Views
0
Helpful
2
Replies