We have a wirless network set up with a 2100 series controller at the main site that monitors and manages 22 AP's at present time spread out over 3 sites via a WAN utilizing a DSL internet setup at the main office.We have a private ssid with wpa2 security and authenication for travelling users to connect to thier data and also an open ssid for internet coverage for guests.
This is working but we are adding wireless internet traffic over the WAN with limited bandwidth and will soon outgrow the 25 max APs.
Was wondering....Can we put a controller at each site that manages the APs per site, utilizes a seperate dsl line per site, uses same ssids, and can all be managed by controller at main office.
I think H-REAP and some kind of 4402-50 (4404-100) is your option, because it's always better to have only one management point. WCS and bunch of controllers is nice also, but loses in management effort in my opinion. But it's matter of taste I think.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...