Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

MS-PEAP with windows zero configuration problem

Hello,

Here is my configuration

1130 AP, WLSE Express (radius)

authentication : PEAP with ms-chapv2

My user database is on the WLSE.

MS-Peap works fine with my intel pro/wireless client but always failed with the integrated WZC client on XP SP2. I already patch it with KB885453 but this doesn't help.

Is there some specials parameters on the radius to make it works with WZC ?

Thanks for your help

5 REPLIES

Re: MS-PEAP with windows zero configuration problem

review your log files, you may not have the client configured correctly... Possibly set the wrong certificate.

Community Member

Re: MS-PEAP with windows zero configuration problem

Untick the option to verify certificate in the windows config. PEAP is server side, client can ignore it. Also, check if you are trying to use windows initial login - if so, machine authentication must be enabled.

Hope that helps.

Community Member

Re: MS-PEAP with windows zero configuration problem

I have the same problem with the integrated WZC client on XP SP2. The intel pro/wireless client works fine. You have know any solutions?

Community Member

Re: MS-PEAP with windows zero configuration problem

Hi,

Yes I found the solution.

WZC is not CCX compatible so you have to disable or make optional cckm on the APs with this command :

authen key-manage cckm optional

Bye

Anonymous
N/A

Re: MS-PEAP with windows zero configuration problem

223
Views
5
Helpful
5
Replies
CreatePlease to create content