Multicast on WLC?

[Sergey Tarasevich]

Hi! There is a question about multicast on the controller. When this function should be used? Is there an example of setting the switch to enable this feature on the controller?

[Scott Fella · Accepted solution]

Well... if you are running multicast or an application requires multicast, then you need to enable multicast.  Bonjour is a good example of enabling multicast.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc10d.shtml

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtml

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[Sergey Tarasevich]

Thanks Scott.

[Scott Fella]

No problem

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[Sergey Tarasevich]

ok, Scott. How, for example, configure L3 Multicast Routing on Wired Network (for example, switch 3750x)? Maybe there are some examples of settings?

[George Stefanick]

Read the link Scott posted, it should help get you started

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc10d.shtml

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."