Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Multicast wlc5508

Hi,

Has anybody had any issues setting up multicast on the wireless network with a certain fruit based tv?
We are trying to implement this but have nit managed to get it working, all enabled on the wlc ip address of 239.255.255.1 & everythjng enabled on the switch vlan & ip multicasting routing enabled globally, bjt still the icon does not appear on the tablet device. Have read the latest doc on setting this up but not too sure what i am doing wrong?

Cheers

Sean


Sent from Cisco Technical Support Android App

7 REPLIES
Gold

Multicast wlc5508

Hi Robert,

I like the term fruit based TV :-)

Please check below link

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtml

http://www.cisco.com/en/US/docs/wireless/technology/bonjour/Bonjour_Deployment.html

Hope that helps.

Regards

Najaf

Please rate when applicable or helpful !!!

Hall of Fame Super Silver

Re: Multicast wlc5508

What code are you running on the WLC. Also are you seeing any multicast trading on the switch? Are these fruit TV's wireless or wired and are you trying to cross a layer 3 boundary?

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Re: Multicast wlc5508

Hi,

I am running

7.0.116.0 on the wlc 5508, my fruit based tv is wireless

New Member

Multicast wlc5508

Hi Robertssean,

with this code you can manage the apple TV when the clients and the TV are in the same VLAN!

we have tested this exactly:

AppleTV     Client          Multicast global          Multicast-Mode         

WLAN          WLAN          enable                    Multicast or Unicast IP 239.1.1.10 for example

LAN               WLAN        enable                    Multicast or Unicast IP 239.1.1.10 for example

Router Config               Status

nothing                         Running

nothing                         Running

I hope that helps!

Regards,

Mario

New Member

Multicast wlc5508

Hi,

Our setup we have is, we have a anchor controller that has a guest-wlan of 100 & then a normal 5508 behind that which has vlan 203, in between we have a cisco switch that does not have ip multicast enabled or ip pim sparse enabled, do we have to have this configured? we have managed to get it working locally over a standard linksys ap with IPAD one side & apple tv the pther & was able to get that working all ok, its just wehn we try over the wireless network it does not work & it is very frustrating but something obvious.

Cheers

Sean

New Member

Re: Multicast wlc5508

Hi,

are the clients and the apple tv in the same VLAN ID?

If this not you need a Version 7.4 with the apple bonjour gateway, but this version is in my opinion not stable.

Regards,

Mario

Hall of Fame Super Silver

Re: Multicast wlc5508

I don't think that multicast is supported when anchoring to be honest.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
247
Views
0
Helpful
7
Replies
CreatePlease to create content